Before initiating the design and production of a customized Aeronav, we encourage our customers and partners to verify software, hardware, and business requirements by purchasing one or more Aeronav Dev kits.
The Aeronav Dev kit consists of a standardized Aeronav accompanied by our technical support, making it possible to evaluate your needs and make sure that your requirements have or can be met by our solution. The Dev kit comes with a Panasonic Toughpad, Microsoft Windows, and standard engraving, but with the ability to attach your desired hardware modules and install your software applications. If custom software needs to be developed, we can assist with sample code developed in Java and other languages by request.
The Aeronav is combined with the Panasonic Toughpad, incorporating an 800cd/m² IPSα display. The capacitive 10-finger multi-touch display and digitizer pen makes it extremely user-friendly. The Aeronav runs on Windows 10 Pro, Windows 8, or Ubuntu and is equipped with the Intel® Core™ i5 Processor. It also benefits from connectivity options to ensure data is available to the user whenever needed.
Experience gained from delivering custom robotics solutions for more than 10 years and in-house development and production enables us to provide a streamlined process getting you from your vision to a final custom-tailored control station for your robotics solution.
Drones and other unmanned vehicles have been of avid interest for the past several years, but large-scale adoption of such technologies is yet to be seen. We envision a day when unmanned vehicles create value and solve a wide range of tasks unimaginable today. One of the key challenges in attaining this vision is to ensure that each element in the supply chain is professionalized; that is the target we set out to achieve when we founded UAV Components.
Over the past three years, UAV Components has grown from a small start-up company to a well-established supplier of professional unmanned solutions for some of the world’s leading developers and manufacturers. We are very focused on the development and production of high-quality products found in more than thousands of “drones” in operation today.
Our development and production unit is located on the outskirts of Copenhagen and is just a 15-minute drive from one of the busiest airports in Northern Europe. However, we are an international organization that serves many nationalities and has international partnerships with research institutions and integrators. Our partnerships are critical in our daily work, as we believe that strategic partnerships are vital in an industry like unmanned technology.
|Width:||40 cm / 15.75”||Harness|
|Length:||20 cm / 7.8”||Extended Battery *|
|Height:||6.5 cm / 2.55”|
|Weight:||1.2 kg||Aeronav Human Interface|
|Left Thumb: OTTO Hall-effect, Castle style joystick IP68S|
|Tablet peripherals||Right Thumb: OTTO Hall-effect, Castle style joystick IP68S|
|Wi-Fi||Left Index finger: None|
|USB connector||Right Index finger: Alps Potentiometer joystick|
|3G, 4G, LTE *||Left side top panel:|
|RJ45 Gigabit Ethernet **||A1: APEM MON-ON Toggle switch|
|A2: APEM Momentary Pushbutton with sealboot|
|Aeronav peripherals||A3: APEM ON-OFF-ON Toggle switch|
|2 x USB connector||Right side top panel:|
|PPM through topconnector *||C1: APEM ON-ON Toggle switch|
|SBUS through topconnector *||C2: APEM SAFETY ON-ON Toggle switch|
|C3: APEM MON-OFF-ON Toggle switch|
|*) Optional (might increase leadtime)|
|**) Optional (might increase leadtime) + RJ45 and USB is not possible at the same time.|